锤式破碎机_重型锤式破碎机_锤式破碎机型号_小型锤式破碎机==河南瑞朗机械

锤式破碎机主要用于破碎一般的脆性矿石，如石灰石、煤、泥质粉砂岩、页岩、石膏等，此系列破碎机是水泥生产专用破碎机，适合破碎石灰石(泥灰岩)和粘土质混合料，还可用于煤块破碎。

锤式破碎机适用于破碎抗压强度<150MPa的石灰石、泥灰岩、砂岩、页岩、石膏、煤等原料，该破碎机可以将采场的大块矿石一次破碎到入磨需要的粒度，从而可以取代传统的两段破碎，简化工艺流程、节约基建投资和生产费用。

 主要用于破碎一般的脆性矿石，如石灰石、泥质粉砂岩、页岩、石膏和煤等，此系列破碎机是水泥生产专用破碎机，同时也适合破碎石灰石(泥灰岩)和粘土质混合料。由于破碎机转子尺寸设计合理，机身适当，使得配套设备如吊车、板喂机的选型规格较小，从而节省整个系统的设备投资和基建投资。因此，只要矿石的物理性质合适，选用锤式破碎机作为大型矿山的破碎设备是比较经济可靠的方案。

  此破碎机具有入料粒度大，破碎比大的特点，可将大块原矿石一次破碎到符合入磨的粒度，使过去需要的多段破碎的生产系统简化为一段破碎，与传统的两段破碎系统相比，可节省一次性投资45%，车间设备重量减轻32.5%，矿石破碎成本降低40%。操作简单、维修方便、改善了工人的劳动强度，因此，只要矿石的物理性质适合，选用本机做为大型矿山的破矿设备是比较经济可靠的方案。

  锤式破碎机作为水泥厂主要原料的破碎设备，与单转子单段破碎设备相比，更适合降雨量较多、料湿、含土较大的工作状况，由于它具有特殊的结构，使得破碎较粘物料时消除了堵塞粘附之患，并且具有特殊的双重过铁保护装置，可将不慎混入机内的铲齿、钻头、铁锤等金属异物自动反弹回给料辊或排出机外，不必为此停机。与相同生产能力的单转子单段锤式破碎机相比，设备重量较轻。由于两个转子可以悬挂更多锤头，所以可供使用的磨损金属量更大，锤头寿命更长。

Hammer crusher, heavy-duty hammer crusher, hammer crusher model, small hammer crusher==Henan Ruilang Machinery

Hammer crushers are mainly used to crush general brittle ores such as limestone, coal, argillaceous sandstone, shale, gypsum, etc. This series of crushers is a specialized crusher for cement production, suitable for crushing limestone (mudstone) and clay mixtures, and can also be used for coal block crushing.

The hammer crusher is suitable for crushing raw materials such as limestone, mudstone, sandstone, shale, gypsum, coal, etc. with compressive strength<150MPa. This crusher can crush large ore blocks from the mining site to the required particle size for grinding in one go, replacing traditional two-stage crushing, simplifying the process flow, saving infrastructure investment and production costs.

Mainly used for crushing general brittle ores such as limestone, argillaceous sandstone, shale, gypsum, and coal, this series of crushers is a specialized crusher for cement production, and is also suitable for crushing limestone (mudstone) and clay mixtures. Due to the reasonable design of the crusher rotor size and appropriate body, the selection specifications of supporting equipment such as cranes and plate feeders are relatively small, thereby saving the equipment investment and infrastructure investment of the entire system. Therefore, as long as the physical properties of the ore are suitable, choosing a hammer crusher as the crushing equipment for large-scale mines is a relatively economical and reliable solution.

This crusher has the characteristics of large feed particle size and high crushing ratio. It can crush large pieces of raw ore to the appropriate particle size for grinding at once, simplifying the production system that used to require multi-stage crushing into one stage crushing. Compared with the traditional two-stage crushing system, it can save 45% of one-time investment, reduce workshop equipment weight by 32.5%, and reduce ore crushing costs by 40%. The operation is simple, maintenance is convenient, and the labor intensity of workers is improved. Therefore, as long as the physical properties of the ore are suitable, using this machine as a crushing equipment for large-scale mines is a relatively economical and reliable solution.

As the main raw material crushing equipment in cement plants, the hammer crusher is more suitable for working conditions with high rainfall, wet materials, and high soil content compared to single rotor single-stage crushing equipment. Due to its special structure, it eliminates the risk of blockage and adhesion when crushing sticky materials. It also has a special double iron protection device, which can automatically bounce back metal foreign objects such as shovel teeth, drill bits, and hammers that accidentally mix into the machine to the feeding roller or discharge outside the machine without stopping the machine. Compared with single rotor single-stage hammer crushers with the same production capacity, the equipment is lighter in weight. Due to the fact that two rotors can suspend more hammer heads, there is a greater amount of wear metal available for use, resulting in a longer lifespan of the hammer heads.